Lantronix XPress DR+ Manual do Utilizador descarregar pdf (Página 47)

Chapter 6: Configuration Using Web Manager

XPress DR+ User Guide 47

Figure 6-2. Network Settings

Automatic IP Address Configuration

An IP address can be assigned automatically. You then enter related network settings.

To assign an IP address automatically:

1. On the main menu, click Network.

2. (Wireless units only) From the Network Mode drop-down list, select Wired Only

or Wireless Only to set the unit for wired or wireless use.

3. Select Obtain IP address automatically.

4. Enter the following (as necessary):

BOOTP Select Enable to permit the Bootstrap Protocol (BOOTP)

server to assign the IP address from a pool of addresses

automatically. Enable is the default setting.

DHCP Select Enable to permit the Dynamic Host Configuration

Protocol (DHCP) to assign a leased IP address to the XPress

DR+ unit automatically. Enable is the default setting.

AutoIP Select Enable to permit the XPress DR+ to generate an IP in

the 169.254.x.x address range with a Class B subnet. Enable

is the default setting.

DHCP Host Name

Enter the name of the host on the network providing the IP

address.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 115 116

Sem comentários

Lantronix XPress DR+ Manual do Utilizador Página 47