Lantronix Network Router 900-607 Manual do Utilizador

Part Number 900-607Revision A February 2012PremierWave XNCommand Reference

3: Command Line InterfacePremierWave XN Command Reference 10To configure the Lantronix device server locally using a serial port:1. Connect a terminal

5: Commands and Levels PremierWave XN Command Reference 100 <number> = port to be used. show Displays the current configuration. show history

5: Commands and Levels PremierWave XN Command Reference 101 port <number> Sets the remote port to use for connect mode tunneling. <number&

5: Commands and Levels PremierWave XN Command Reference 102 spaces. aes encrypt key text <text> Sets the connect tunnel AES encrypt key with u

5: Commands and Levels PremierWave XN Command Reference 103 vip name <text> Sets the VIP name. write Stores the current configuration in perma

5: Commands and Levels PremierWave XN Command Reference 104 bytes. Each byte is represented by a single character. Note that quotes must enclose t

5: Commands and Levels PremierWave XN Command Reference 105 write Stores the current configuration in permanent memory. host 16 (tunnel-connect-host

5: Commands and Levels PremierWave XN Command Reference 106 tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunne-ling.

5: Commands and Levels PremierWave XN Command Reference 107 host 17 (config-host:17) level commands clrscrn Clears the screen. default protocol Rest

5: Commands and Levels PremierWave XN Command Reference 108 <text> = username. write Stores the current configuration in permanent memory. hos

5: Commands and Levels PremierWave XN Command Reference 109 bytes. Each byte is represented by a single character. Note that quotes must enclose t

3: Command Line InterfacePremierWave XN Command Reference 11Using Keyboard Shortcuts and CLIOne useful shortcut built into PremierWave XN is that the

5: Commands and Levels PremierWave XN Command Reference 110 write Stores the current configuration in permanent memory. host 2 (tunnel-connect-host:

5: Commands and Levels PremierWave XN Command Reference 111 tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunne-ling.

5: Commands and Levels PremierWave XN Command Reference 112 host 20 (config-host:20) level commands clrscrn Clears the screen. default protocol Rest

5: Commands and Levels PremierWave XN Command Reference 113 <text> = username. write Stores the current configuration in permanent memory. hos

5: Commands and Levels PremierWave XN Command Reference 114 CLI session. ssh username <text> Sets the username for logging into the host via S

5: Commands and Levels PremierWave XN Command Reference 115 show Displays the current configuration. show history Displays the last 20 commands ente

5: Commands and Levels PremierWave XN Command Reference 116 remote port <number> Sets the remote port used to connect to the host. <number

5: Commands and Levels PremierWave XN Command Reference 117 selected on the login connect menu. <text> = IP address. remote port <number&g

5: Commands and Levels PremierWave XN Command Reference 118 no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode T

5: Commands and Levels PremierWave XN Command Reference 119 Bytes may run together or be separated by optional punc-tuation: 123ABC "12 3A BC&

3: Command Line InterfacePremierWave XN Command Reference 12An overview of the levels in the PremierWave XN is presented in Figure 3-2 CLI Level Hiera

5: Commands and Levels PremierWave XN Command Reference 120 validate certificate enable Requires verification of the server certificate when con-ne

5: Commands and Levels PremierWave XN Command Reference 121 remote port <number> Sets the remote port used to connect to the host. <number

5: Commands and Levels PremierWave XN Command Reference 122 selected on the login connect menu. <text> = IP address. remote port <number&g

5: Commands and Levels PremierWave XN Command Reference 123 no ssh username Removes the SSH user name. no tcp keep alive Disables the connect mode T

5: Commands and Levels PremierWave XN Command Reference 124 Bytes may run together or be separated by optional punc-tuation: 123ABC "12 3A BC&

5: Commands and Levels PremierWave XN Command Reference 125 validate certificate enable Requires verification of the server certificate when con-ne

5: Commands and Levels PremierWave XN Command Reference 126 tuation: 123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc Note that quotes must

5: Commands and Levels PremierWave XN Command Reference 127 necting. vip disable Makes connections using the specified Address. vip enable Makes con

5: Commands and Levels PremierWave XN Command Reference 128 protocol ssh Uses SSH protocol for connect mode tunneling. protocol ssl Uses SSL protoco

5: Commands and Levels PremierWave XN Command Reference 129 CLI session. ssh username <text> Sets the username for logging into the host via S

3: Command Line InterfacePremierWave XN Command Reference 13Figure 3-4 Enable Level Commands>enable<enable>#?auto show interfaces auto show

5: Commands and Levels PremierWave XN Command Reference 130 protocol ssl Uses SSL protocol for connect mode tunneling. protocol tcp Uses TCP protoco

5: Commands and Levels PremierWave XN Command Reference 131 Note that quotes must enclose the value if it contains spaces. auto show statistics show

5: Commands and Levels PremierWave XN Command Reference 132 clrscrn Clears the screen. default protocol Restores the default value of the protocol (

5: Commands and Levels PremierWave XN Command Reference 133 auto show statistics show connection statistics clrscrn Clears the screen. credentials &

5: Commands and Levels PremierWave XN Command Reference 134 <text> = IP address or host name of the remote host. aes decrypt key <hexadecim

5: Commands and Levels PremierWave XN Command Reference 135 protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. show

5: Commands and Levels PremierWave XN Command Reference 136 bytes. Each byte is represented by two adjacent hex digits. Bytes may run together or

5: Commands and Levels PremierWave XN Command Reference 137 show Shows the current configuration. show history Displays the last 20 commands entered

5: Commands and Levels PremierWave XN Command Reference 138 exit Exits to the next higher level. no address Removes the remote host address used to

5: Commands and Levels PremierWave XN Command Reference 139 no name Clears the name of the host. no remote address Clears the remote address of the

PremierWave XN Command Reference 144: Configuration Using XMLThe device server provides an Extensible Markup Language (XML) interface that you can use

5: Commands and Levels PremierWave XN Command Reference 140 no address Removes the remote host address used to establish tunneling connections. no

5: Commands and Levels PremierWave XN Command Reference 141 aes decrypt key text <text> Sets the connect tunnel AES decrypt key with up to 16

5: Commands and Levels PremierWave XN Command Reference 142 with other devices. <text> = SSH user name. tcp keep alive <milliseconds> E

5: Commands and Levels PremierWave XN Command Reference 143 <uri> = URI of the server. auth type <uri> ssl-basic Sets the authentication

5: Commands and Levels PremierWave XN Command Reference 144 no clear counters Restores the HTTP counters to the aggregate values. no port Disables t

5: Commands and Levels PremierWave XN Command Reference 145 if <instance> Changes to the interface configuration level. ip address <ip addr

5: Commands and Levels PremierWave XN Command Reference 146 no hostname Clears the host name. no ip address Clears the IP address. no primary dns Cl

5: Commands and Levels PremierWave XN Command Reference 147 <string> = text with possible binary characters. Within [] use binary decimal up

5: Commands and Levels PremierWave XN Command Reference 148 show line Displays the current configuration. show statistics Shows the line statistics.

5: Commands and Levels PremierWave XN Command Reference 149 when the device boots and when the line is in command mode. <string> = text with

4: Configuration Using XMLPremierWave XN Command Reference 15Note: The name for each <configgroup> (specified with the name attribute) is the g

5: Commands and Levels PremierWave XN Command Reference 150 show history Displays the last 20 commands entered during the current CLI session. show

5: Commands and Levels PremierWave XN Command Reference 151 default out of range scan interval Restores the default value to the out-of-range scan

5: Commands and Levels PremierWave XN Command Reference 152 default output Restores the default log output, which is disable. exit Exits to the next

5: Commands and Levels PremierWave XN Command Reference 153 display remote ip disable The incoming RING has nothing following it. display remote ip

5: Commands and Levels PremierWave XN Command Reference 154 show history Displays the last 20 commands entered during the current CLI session. thre

5: Commands and Levels PremierWave XN Command Reference 155 exit Exits to the next higher level. no password Removes the password so connections wil

5: Commands and Levels PremierWave XN Command Reference 156 CLI session. trace route <host> Trace route to destination trace route <host>

5: Commands and Levels PremierWave XN Command Reference 157 delete all authorized users Removes all authorized users delete authorized user <user

5: Commands and Levels PremierWave XN Command Reference 158 <number> = local port number. show Displays the current configuration. show histor

5: Commands and Levels PremierWave XN Command Reference 159 exit Exits to the CLI level. max sessions <number> Sets the maximum allowed concur

4: Configuration Using XMLPremierWave XN Command Reference 16Record, Group, Item, and Value TagsA <configgroup> is a logical grouping of configu

5: Commands and Levels PremierWave XN Command Reference 160 figured. terminal network Enters the configure-terminal level for the network. terminal

5: Commands and Levels PremierWave XN Command Reference 161 write Stores the current configuration in permanent memory. terminal network (config-ter

5: Commands and Levels PremierWave XN Command Reference 162 <cert> = index displayed by "show authority" command. no trusted authori

5: Commands and Levels PremierWave XN Command Reference 163 figured. terminal network Enters the configure-terminal level for the network. tunnel &l

5: Commands and Levels PremierWave XN Command Reference 164 xcr import <file> Load XML configuration from a local file xcr import <file>

4: Configuration Using XMLPremierWave XN Command Reference 17Figure 4-5 XML Example of Multiple Items <configgroup name="ssh server"&g

4: Configuration Using XMLPremierWave XN Command Reference 18 CLI-XCRs can be imported (captured) or exported (dumped) directly to a Telnet, SSH, or

4: Configuration Using XMLPremierWave XN Command Reference 19The same guidelines above regarding importing configurations also apply to exporting conf

PremierWave XN Command Reference 2Copyright and Trademark© 2012 Lantronix. All rights reserved. No part of the contents of this book may be transmitt

4: Configuration Using XMLPremierWave XN Command Reference 20XML Configuration GroupsTable 4-7 lists the PremierWave XN XCR groups in alphabetical ord

4: Configuration Using XMLPremierWave XN Command Reference 21email (continued) subjectmessage fileoverriding domainserver port Default: 25local port &

4: Configuration Using XMLPremierWave XN Command Reference 22icmp state enable, disable Default: enableinterface state enable, disable Default: depend

4: Configuration Using XMLPremierWave XN Command Reference 23line nameinterface rs232 Default:termination enable, disable Default: disablestate enable

4: Configuration Using XMLPremierWave XN Command Reference 24managelinx plaintext dsm credentialsdna.xml.replication.protocol.versiondna.capabilities.

4: Configuration Using XMLPremierWave XN Command Reference 25serial command modemode always, serial string, disableDefault: disableecho serial string

4: Configuration Using XMLPremierWave XN Command Reference 26ssh client delete known hosts enable, disable If enabled, deletes any existing hosts befo

4: Configuration Using XMLPremierWave XN Command Reference 27ssl credentials rsa certificatersa private key Value is SECRET, hidden from user view.dsa

4: Configuration Using XMLPremierWave XN Command Reference 28tunnel accept (continued)start character Accepts a control character, for example, &#

4: Configuration Using XMLPremierWave XN Command Reference 29tunnel connect (continued)host vip enable, disable Default: disablevip nameaddressport &a

PremierWave XN Command Reference 3Table of ContentsList of Figures _____________________________________________________________4List of Tables _____

4: Configuration Using XMLPremierWave XN Command Reference 30tunnel packing packing mode disable, timeout, send characterDefault: disabletimeout Defau

4: Configuration Using XMLPremierWave XN Command Reference 31wlan profile (continued)advanced tx data rate maximum 1 Mbps, 2 Mbps, 5.5 Mbps, 6 Mbps, 9

4: Configuration Using XMLPremierWave XN Command Reference 32wlan profile (continued)security (continued) wpax encryption ccmp, tkip, wep May contain

4: Configuration Using XMLPremierWave XN Command Reference 33XML Status Record Groups and ItemsTable 4-8 lists the supported XML Status Record (XSR) g

4: Configuration Using XMLPremierWave XN Command Reference 34http state enable or disablelogging entries decimal numberbytes decimal numberhttp log to

4: Configuration Using XMLPremierWave XN Command Reference 35interface (Attribute of "instance" is "eth0") (continued)receive byte

4: Configuration Using XMLPremierWave XN Command Reference 36ip (continued) netstat InNoRoutes decimal numberInTruncatedPkts decimal numberInMcastPkts

4: Configuration Using XMLPremierWave XN Command Reference 37line (group nested within line above)state enable or disableprotocol Tunnel or None.baud

4: Configuration Using XMLPremierWave XN Command Reference 38sessions telnet or ssh (Attribute of "instance" is "<decimal>")

4: Configuration Using XMLPremierWave XN Command Reference 39tcp (continued) netstat (continued) PAWSEstab decimal numberDelayedACKs decimal numberDel

PremierWave XN Command Reference 4List of FiguresFigure 3-2 CLI Level Hierarchy ______________________________________________________12Figure 3-3 Log

4: Configuration Using XMLPremierWave XN Command Reference 40tcp (continued) netstat (continued) TCPDSACKOldSent decimal numberTCPDSACKOfoSent decimal

4: Configuration Using XMLPremierWave XN Command Reference 41tunnel (continued) aggregate (continued) connect 6 connection time elapsed time in format

4: Configuration Using XMLPremierWave XN Command Reference 42vip data bytes receive decimal numbertransmit decimal numberudp packet queue receive deci

4: Configuration Using XMLPremierWave XN Command Reference 43Note: *If a scan is run while the unit is associated with an access point, only the chann

5: Commands and Levels PremierWave XN Command Reference 44 5: Commands and Levels Click the level in the tree structure and it will take you to t

5: Commands and Levels PremierWave XN Command Reference 45 • link (config-wlan:wlan0) • choice 1 (config-wlan-choice:wlan0:1) • choice 2 (confi

5: Commands and Levels PremierWave XN Command Reference 46 • host 8 (tunnel-connect-host:1:8) • host 9 (tunnel-connect-host:1:9) • host 10 (tun

5: Commands and Levels PremierWave XN Command Reference 47 Table 5-1 Commands and Levels accept (tunnel-accept:2) level commands accept mode always

5: Commands and Levels PremierWave XN Command Reference 48 default local port Uses the default port number as the local port for accept mode tunnel

5: Commands and Levels PremierWave XN Command Reference 49 A decimal value character has the form \99. A hex value character has the form 0xFF. tcp

PremierWave XN Command Reference 5List of TablesTable 3-1 Keyboard Shortcuts ______________________________________________________11Table 4-7 XCR Gr

5: Commands and Levels PremierWave XN Command Reference 50 clrscrn Clears the screen. credentials <text> Selects the RSA/DSA certificates by n

5: Commands and Levels PremierWave XN Command Reference 51 show status Displays tunnel accept status. start character <control> Sets the accep

5: Commands and Levels PremierWave XN Command Reference 52 show Shows the current configuration. show history Displays the last 20 commands entered

5: Commands and Levels PremierWave XN Command Reference 53 inactivity timeout <minutes> Sets the inactivity timeout for all CLI sessions. line

5: Commands and Levels PremierWave XN Command Reference 54 clrscrn Clears the screen. diagnostics Enters the diagnostics level. exit Exits to the en

5: Commands and Levels PremierWave XN Command Reference 55 start character is received on the line. default connect mode Restores the default conne

5: Commands and Levels PremierWave XN Command Reference 56 start character <control> Sets the connect mode start character. The character may

5: Commands and Levels PremierWave XN Command Reference 57 mode tunneling connection. flush start character disable Enables forwarding of the conne

5: Commands and Levels PremierWave XN Command Reference 58 show hardware information Displays information about the hardware. show history Displays

5: Commands and Levels PremierWave XN Command Reference 59 flush stop character disable Forwards the stop character from the Line to the network. fl

PremierWave XN Command Reference 61: About This GuideThis guide describes how to configure the PremierWave XN using the Command Line Interface (CLI) a

5: Commands and Levels PremierWave XN Command Reference 60 <text> = the name of a local file. no cc Removes the Cc addresses for email alerts.

5: Commands and Levels PremierWave XN Command Reference 61 from <text> Sets the From address for email alerts. <text> = email address t

5: Commands and Levels PremierWave XN Command Reference 62 clrscrn Clears the screen. default local port Sets the local port (used to send email ale

5: Commands and Levels PremierWave XN Command Reference 63 email 12 (email:12) level commands auto show statistics Continuously displays email stati

5: Commands and Levels PremierWave XN Command Reference 64 show log Displays the email log. show statistics Displays email statistics. subject <t

5: Commands and Levels PremierWave XN Command Reference 65 <text> = email address to place in the Reply To field of the email alert. send Send

5: Commands and Levels PremierWave XN Command Reference 66 name in EHLO. priority high Sets X-Priority for email alerts to 2 (high). priority low Se

5: Commands and Levels PremierWave XN Command Reference 67 no reply to Removes the Reply To address for email alerts. no subject Removes subject use

5: Commands and Levels PremierWave XN Command Reference 68 <text> = the name of a local file. no cc Removes the Cc addresses for email alerts.

5: Commands and Levels PremierWave XN Command Reference 69 from <text> Sets the From address for email alerts. <text> = email address t

1: About This GuidePremierWave XN Command Reference 7Additional DocumentationVisit the Lantronix website at www.lantronix.com/support/documentation fo

5: Commands and Levels PremierWave XN Command Reference 70 clrscrn Clears the screen. default local port Sets the local port (used to send email ale

5: Commands and Levels PremierWave XN Command Reference 71 email 4 (email:4) level commands auto show statistics Continuously displays email statist

5: Commands and Levels PremierWave XN Command Reference 72 show log Displays the email log. show statistics Displays email statistics. subject <t

5: Commands and Levels PremierWave XN Command Reference 73 <text> = email address to place in the Reply To field of the email alert. send Send

5: Commands and Levels PremierWave XN Command Reference 74 name in EHLO. priority high Sets X-Priority for email alerts to 2 (high). priority low Se

5: Commands and Levels PremierWave XN Command Reference 75 no reply to Removes the Reply To address for email alerts. no subject Removes subject use

5: Commands and Levels PremierWave XN Command Reference 76 <text> = the name of a local file. no cc Removes the Cc addresses for email alerts.

5: Commands and Levels PremierWave XN Command Reference 77 from <text> Sets the From address for email alerts. <text> = email address t

5: Commands and Levels PremierWave XN Command Reference 78 connect line <line> Begin session on serial port. device Enters the device level. d

5: Commands and Levels PremierWave XN Command Reference 79 format Format the file system and lose all data ls Show all files and directories in the

PremierWave XN Command Reference 82: OverviewPremierWave XN supports three convenient configuration methods: Web Manager, Command Line Interface (CLI)

5: Commands and Levels PremierWave XN Command Reference 80 bytes. Each byte is represented by a single character. Note that quotes must enclose th

5: Commands and Levels PremierWave XN Command Reference 81 write Stores the current configuration in permanent memory. host 1 (tunnel-connect-host:1

5: Commands and Levels PremierWave XN Command Reference 82 tunneling. protocol telnet Uses Telnet protocol (with IAC) for connect mode tunne-ling. p

5: Commands and Levels PremierWave XN Command Reference 83 host 10 (tunnel-connect-host:2:10) level commands address <text> Sets the remote ho

5: Commands and Levels PremierWave XN Command Reference 84 protocol telnet Uses Telnet protocol (with IAC) for connect mode tunne-ling. protocol ud

5: Commands and Levels PremierWave XN Command Reference 85 credentials <text> Selects the RSA/DSA certificates by name for the SSL client. def

5: Commands and Levels PremierWave XN Command Reference 86 which depends on the selected protocol. exit Exits to the configuration level. host <n

5: Commands and Levels PremierWave XN Command Reference 87 client. default protocol Restores the default protocol as "TCP". default tcp ke

5: Commands and Levels PremierWave XN Command Reference 88 Each byte is represented by two adjacent hex digits. Bytes may run together or be separa

5: Commands and Levels PremierWave XN Command Reference 89 show Shows the current configuration. show history Displays the last 20 commands entered

PremierWave XN Command Reference 93: Command Line InterfaceThis chapter describes accessing the PremierWave XN by using Telnet, SSH, or serial ports t

5: Commands and Levels PremierWave XN Command Reference 90 Bytes may run together or be separated by optional punc-tuation: 123ABC "12 3A BC&q

5: Commands and Levels PremierWave XN Command Reference 91 show history Displays the last 20 commands entered during the current CLI session. show

5: Commands and Levels PremierWave XN Command Reference 92 no address Removes the remote host address used to establish tunneling connections. no a

5: Commands and Levels PremierWave XN Command Reference 93 no remote address Clears the remote address of the host. no ssh username Clears the SSH u

5: Commands and Levels PremierWave XN Command Reference 94 no aes decrypt key Removes the connect tunnel AES decrypt key. no aes encrypt key Removes

5: Commands and Levels PremierWave XN Command Reference 95 Note that quotes must enclose the value if it contains spaces. aes encrypt key <hexade

5: Commands and Levels PremierWave XN Command Reference 96 sets the timer. <milliseconds> = timer value, in milliseconds. validate certificat

5: Commands and Levels PremierWave XN Command Reference 97 aes encrypt key <hexadecimal> Sets the connect tunnel AES encrypt key with up to 16

5: Commands and Levels PremierWave XN Command Reference 98 validate certificate disable Skips verification of the server certificate when connect-i

5: Commands and Levels PremierWave XN Command Reference 99 no vip name Removes the VIP name. port <number> Sets the remote port to use for con