Lantronix Computer Hardware 900-581 Manual do Utilizador descarregar pdf (Página 202)

5: Commands and Levels

Telnet sessions.

default port

Restores the default local port to the Telnet server.

exit

Exits to the CLI level.

max sessions <number>

Sets the maximum allowed concurrent incoming Telnet sessions.

<number> = number of sessions.

port <number>

Sets the local port that the Telnet server uses.

<number> = local port number.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

show statistics

Displays the Telnet statistics.

state disable

Disables the Telnet Server.

state enable

Enables the Telnet Server.

write

Stores the current configuration in permanent memory.

terminal 1 (config-terminal:1) level commands

break duration <milliseconds>

Sets how long a break should last when it is being sent to the line.

<milliseconds> = number of milliseconds.

clrscrn

Clears the screen.

default break duration

Restores the break duration to the default value (500 ms).

default terminal type

Sets the default terminal type, "UNKNOWN".

echo disable

Disables echoing of characters received on the line back to the

line.

echo enable

Enables echoing of characters received on the line back to the

line.

exit

Exits to the configuration level.

exit connect menu disable

On the login connect menu, removes the menu item allowing the

user to exit

to the CLI.

exit connect menu enable

On the login connect menu, inserts the menu item allowing the

user to exit

to the CLI.

line <line>

Enters the line level.

<line> = number of the line (serial port) to be configured.

Disables the login connect menu, so a user will get the CLI imme-

diately

after logging in.

Enables the login connect menu, so a user will get the menu ra-

ther than the

CLI immediately after logging in.

no send break

Removes the configured send break character.

preview connect menu

Shows the layout of the connect menu with current settings.

send break <control>

Sets the optional send break character.

<text> = the character.

The character may be input as text, control, decimal, or hex.

A control character has the form <control>C.

A decimal value character has the form \99.

A hex value character has the form 0xFF.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

PremierWave EN Command Reference 202

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 211 212

Comentários a estes Manuais

Sem comentários

Lantronix Computer Hardware 900-581 Manual do Utilizador Página 202

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Lantronix Computer Hardware 900-581