Lantronix EDS1100 Guia do Utilizador descarregar pdf (Página 26)

EDS1100/2100 User Guide 25

4: Installation of EDS2100

This chapter describes how to install the EDS2100 device server. It contains the following

sections:

 Package Contents

 User-Supplied Items

 Hardware Components

 Installing the EDS2100

Package Contents

The EDS2100 package includes the following items:

 One EDS2100 device

 One DB9F-to-DB9F serial null modem cable

 Power Cube, 100-240 VAC with international adapters

 Power cord restraint

 Printed Quick Start Guide

User-Supplied Items

To complete your installation, you need the following items:

 RS-232/422/485 serial devices that require network connectivity.

 A serial cable, as listed below, for each serial device. One end of the cable must have a

female DB9 connector for the serial port.

- A null modem cable, such as the one supplied in your EDS2100 package, to connect the

serial port to another DTE device.

- A straight-through modem cable to connect the serial port to a DCE device.

 An available connection to your Ethernet network and an Ethernet cable.

 A working power outlet if the unit will be powered from an AC outlet.

Hardware Components

The EDS2100 has two male DB9 serial ports that support RS-232/422/485. Figure 4-1 shows the

front of the device. The default serial port settings are 9600 baud, 8 bits, no parity, 1 stop bit, no

flow control.

Figure 4-1 EDS2100 Male DB9 DTE Serial Ports

The RS-232 pinout configuration is shown in Figure 4-2.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 156 157

Sem comentários

Lantronix EDS1100 Guia do Utilizador Página 26