Lantronix SCS1620 Guia do Utilizador descarregar pdf (Página 85)

SCSxx05/SCSxx20 User Guide 7: System Administrator and User Functions

7-4

Terminal Port Access

To form a terminal port connection to the SCS, use a hardwired VT100 terminal

or terminal emulation program that is connected to the terminal connector on the

SCS. The system administrator normally uses this type connection during service

events; however, any user who has access to the VT100 terminal and a

password can log into the system this way.

SCS4805

SCS4805 login:

SCS4805 login: imauser

Password:

imauser>

1. At the SCS login prompt, enter your user name and press Enter.

Note: Always use the Enter key near the alphanumeric keys on

your keyboard.

2. At the Password prompt, enter your password and press Enter. (The system

does not display the characters you type.) The command prompt changes to

the user’s login name (as above).

Modem Module

The SCSxx20 with the optional modem module can support three configurations:



Plain text tty: Provides an interface identical to that of the terminal port

or a telnet-ed user, with the standard login and password prompts.

 PPP connection: Allows a remote user to establish a PPP connection

with the SCS. You need a standard SCS user/password pair to

authenticate to the system. IP traffic can then be forwarded through the

SCS to the Ethernet port. This allows standard Internet applications to

communicate to systems, including the SCSxx20, on the network

attached to the Ethernet port of the SCSxx20. These applications include

but are not limited to telnet, ftp, and SSH. CHAP is also supported.

 Callback Connection: Allows a remote user to establish a connection

with the SCSxx20 only after the user logs in with a callback pseudo user,

at which time the SCSxx20 drops the connection, delays for a period of

time (30 sec.), and then dials the user back at a pre-assigned phone

number. Callback may be tty or PPP.

Selecting a Device Port

The system administrator assigns permission to connect to specific device ports

in your user profile. If you try to connect, but you do not have access, the

message “NO ACCESS TO DEVICE CHANNEL” displays.

1. To select a server connected to a device port, type select followed by a

device port ID. For example, to connect to a server named Alpha on device

port 2, you may either type select Alpha or select 2.

2. Press Enter.

Monitoring the Buffered Data for a Port

When you select a server, the prompt changes to the server name in the general

form USER_NAME-SERVER_NAME>. For example, if user GEORGE selects

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 140 141

Comentários a estes Manuais

Sem comentários

Lantronix SCS1620 Guia do Utilizador Página 85

Comentários a estes Manuais