Lantronix SCS1620 Guia do Utilizador descarregar pdf (Página 39)

SCSxx05/SCSxx20 User Guide 3: Quick Start

3-3

Figure 3-2. Front Panel Setup Options with Associated Parameters

Normal Network Terminal Release Dates Time / Date Settings

IP Setting Settings System Timezone

Subnet Mask LCD Calendar

Gateway

DNS1

DNS2

DNS3

3. When the display shows the feature that you wish to edit, press the Enter

key on the keypad to enter the editing mode. In our example, the display

shows Editing Network Settings. A cursor displays below one character of

the existing IP address setting.

4. Enter a new IP address as follows:

a) Use the left or right arrow to move the cursor to the left or to the right

position. Use the up and down arrows to increment or decrement the

numerical value.

b) When you have the complete parameter value as you want it, press the

ENTER button to complete the entry. The system will save your new

value (indicated with an asterisk in the display) after you complete all

required parameters.

Note: You must edit the IP Address, the Subnet Mask, and the

Gateway parameters together for a valid IP address

combination.

5. Press the down arrow to move to the next parameter

6. Repeat steps 3-5 to select and complete the remaining options.

7. To save your entries for that group of parameters when you are done:

a) In response to the Save Changes? prompt, press the down arrow button

again. A Yes/No prompt displays.

b) To save the changes, use the left/right arrow buttons to select Yes, and

press the ENTER button.

When network parameters are successfully changed, the front display

indicates Network Restarting. If you do not see this display, there is an

error with your entry, and no network changes were implemented. You

must go back and re-enter the parameters.

8. Repeat steps 3-7 for each menu option.

9. To review the saved settings, press the up or down arrows to step through

the current settings.

When you are done, the front panel returns to the clock display. The network

port resets to the new settings, and you can connect to your IP network for

further administration. You should be able to Telnet or SSH to the SCS with

your network connection.

10. Log in using sysadmin as the user name and the default password, PASS.

11. Continue entering settings using the setup command. (See Configuration.)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 140 141

Comentários a estes Manuais

Sem comentários

Lantronix SCS1620 Guia do Utilizador Página 39

Comentários a estes Manuais