Lantronix SCS1620 Guia do Utilizador descarregar pdf (Página 80)

6-1

If your SCSxx20 was shipped with a modem installed, it is not necessary to

perform the modem setup, and you can skip this chapter. This procedure is for

installing a modem in the field.

This chapter includes the following topics:

Topic Page

Installing a Modem Card 6-1

Initializing the Modem 6-1

Installing a Modem Card

Note: It is not necessary to power down the unit before installing the modem

card.

1. Remove the blank metal plate covering the modem slot on the SCSxx20.

2. Insert the modem card into the open slot in the rear of the SCSxx20.

Figure 6-1. Installing a Modem Card in the SCSxx20

3. Tighten the screws on the modem card by hand.

4. Connect the modem to your telephone line using the RJ11 telephone cord.

Initializing the Modem

If a modem card is installed into a working SCS1620, the system administrator

must initialize it for proper operation with the system using the install_modem

command. This command forces a hardware reset of the modem module and

then sends an initialization string that configures the modem for the system. This

string also saves these values into the modem's non-volatile memory.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 140 141

Sem comentários

Lantronix SCS1620 Guia do Utilizador Página 80