Lantronix WiSpan Manual do Utilizador descarregar pdf (Página 41)

10: Troubleshooting

WiSpan User Guide 41

Problem/Message Reason Solution

When you try to enter the Setup

Mode on the WiSpan by means

of the setup port, you get no

response.

The issue is most likely

something covered in the

previous problem, or possibly,

you have Caps Lock on.

Double-check everything in the

problem above. Confirm that

Caps Lock is not on.

You can ping the WiSpan, but

not Telnet to it on port 9999.

There may be an IP address

conflict on your network

The Telnet configuration port

(9999) is disabled within the

WiSpan security settings.

Turn the WiSpan off and then

issue the following commands at

the DOS prompt of your

computer:

ARP -D X.X.X.X (X.X.X.X is the IP

of the WiSpan).

PING X.X.X.X (X.X.X.X is the IP

of the WiSpan).

If you get a response, then there

is a duplicate IP address on the

network. If you do not get a

response, use the setup port to

verify that Telnet is not disabled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentários a estes Manuais

Sem comentários