Lantronix UDS2100 Manual do Utilizador descarregar pdf (Página 23)

4: Configuration Using Web Manager

UDS2100 User Guide 23

Figure 4-2. Network Settings

Automatic IP Address Configuration

An IP address can be assigned automatically. You then enter related network

settings.

To assign an IP address automatically:

1. On the main menu, click Network.

2. Select Obtain IP address automatically.

3. Enter the following (as necessary):

BOOTP Select Enable to permit the Bootstrap Protocol (BOOTP)

server to assign the IP address from a pool of addresses

automatically. Enable is the default.

DHCP Select Enable to permit the Dynamic Host Configuration

Protocol (DHCP) to assign a leased IP address to the

UDS2100 unit automatically. Enable is the default.

AutoIP Select Enable to permit the UDS2100 to generate an IP in

the 169.254.x.x address range with a Class B subnet.

Enable is the default.

DHCP Host Name Enter the name of the host on the network providing the

IP address.

Note: Disabling BOOTP, DHCP, and AutoIP (all three checkboxes) is not

advised as the only available IP assignment method will then be ARP or

serial port.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 82 83

Sem comentários

Lantronix UDS2100 Manual do Utilizador Página 23