Lantronix Ethernet Manual do Utilizador descarregar pdf (Página 36)

Web-Manager Configuration

WiBox2100E User Guide 36

At Time of Disconnect

Select Yes to clear the input buffer when the network

connection to or from the device is disconnected. The default

setting is No.

Flush Output Buffer (Network to Serial)

With Active Connect

Select Yes to clear the output buffer with a connection that is

initiated from the device to the network. The default setting is

No.

With Passive Connect

Select Yes to clear the output buffer with a connection initiated

from the network to the device. The default setting is No.

At Time of Disconnect

Select Yes to clear the output buffer when the network

connection to or from the device is disconnected. The default

setting is No.

3. When you are finished, click the OK button.

4. On the main menu, click Apply Settings.

Connection Settings - TCP

To configure a channel’s TCP settings:

1. From the main menu, click Connection for either Channel 1 or Channel 2 to

display the Connection Settings page for the selected channel.

2. In the available fields, enter the following information:

Connect Protocol

Protocol Select TCP from the pull-down menu.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 91 92

Sem comentários

Lantronix Ethernet Manual do Utilizador Página 36