Lantronix Device Server MSS 485 Manual do Utilizador descarregar pdf (Página 34)

Device Installer

3.7 Channel 1 Configuration

The Channel 1 configuration defines how the serial port responds to network and serial communication.

Serial Settings

To configure the channel’s serial settings:

1. On the main menu, click Serial Settings (under Channel 1) to display the Serial Settings window.

2. In the available fields, enter the following information:

Channel 1

Disable Serial Port

When selected, disables communication through the serial port. The serial

port is enabled by default.

3-12 NET485 User Guide

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 73 74

RS422/485 Serial to 1
Ethernet Adapter 1
Copyright and Trademark 3
Disclaimer and Revisions 4
Warranty 5
Table of Contents 6
Contents 7
NET485 User Guide v 7
List of Figures 8
List of Tables 9
1. NET485 Overview 11
1.2.2 NET485 Wiring 12
Overview 13
NET485 User Guide 1-3 13
1.3.1 RS422 Networks 14
1.3.2 RS485 Networks 15
2. Introduction 17
2.3 Power Supply 18
2.4 Ethernet Interface 19
2.5 Product CD 20
2.6 Additional Documentation 21
2.7 Technical Specifications 22
3. Device Installer 23
3.1.3 RUN Device Installer 24
3.1.4 Device Found 24
3.1.5 Assign IP 25
3.1.6 Assignment 26
3.2 Using Device Installer 27
Device Installer 28
3-6 NET485 User Guide 28
NET485 User Guide 3-7 29
3.4 Network Configuration 30
3.4.3 Ethernet Configuration 31
3.5 Server Configuration 32
3.6 Host List Configuration 33
3.7 Channel 1 Configuration 34
Port Settings 35
Pack Control 35
3-14 NET485 User Guide 36
NET485 User Guide 3-15 37
Disconnect Mode 38
NET485 User Guide 3-17 39
3.8 Email Settings 40
3.8.1 Trigger Configuration 41
3.10 Apply Settings 42
3.11 Apply Factory Defaults 43
3.12.2 Telnet Messages 44
NET485 User Guide 3-23 45
3.13.1 IP Address 46
Table 5 - Netmask Examples 47
Netmask Host Bits 47
3.13.5 DHCP Naming 48
3.14.1 Baudrate 48
3.14.2 I/F (Interface) Mode 49
3.14.3 Flow 49
3.14.4 Port Number 50
3.14.5 Connect Mode 51
3-30 NET485 User Guide 52
3-32 NET485 User Guide 54
3.14.12 Pack Control 59
3.15 E-mail Settings 60
3.15.1 E-mail Setup 61
3.15.2 Trigger Setup 61
3.16 Expert Settings 62
3.16.6 HTTP Port Number 63
3.16.7 SMTP Port Number 63
3.16.8 MTU Size 63
3.16.9 Enable Alternate MAC 63
3.17 Security Settings 64
3.17.6 Disable Web Server 65
3.17.7 Disable Web Setup 65
3.17.8 Disable ECHO Ports 65
3.17.9 Enable Encryption 65
3.18 Defaults 66
4. Monitoring the Network 67
5. Updating Firmware 69
6. Troubleshooting 71
Troubleshooting 72
6-2 NET485 User Guide 72
7. Binary to Hex Conversion 73
7-2 NET485 User Guide 74

Comentários a estes Manuais

Sem comentários

Lantronix Device Server MSS 485 Manual do Utilizador Página 34

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Lantronix Device Server MSS 485